Filter
Top Products
66
TANDBERG Videoconferencing SystemAdvanced use
Video Settings
Camera Tracking Mode
Select the camera tracking mode:
Slow: The system waits a while before zooming in on a single person speaking. Suitable when wide-angle
images are preferred over close-up images.
Norm: Should be used in regular meetings.
Fast: The system quickly zooms in on a single person speaking. Suitable when close-ups are preferred over
wide-angle images.
THE CAMERA TRACKING MODE ENTRY WILL
NOT
BE AVAILABLE IF NOT USING THE WAVE
CAMERA.
Document Camera
Users of a document camera with an S-video output can configure the system to activate an S-video input when
pressing ‘doc cam’ on the remote control.
Video2: Video Input 2 (S-video) will be activated when pressing ‘doc cam’ on the remote control.
Video3: Video Input 3 (Composite) will be activated when pressing ‘doc cam’ on the remote control.
PC*
Configure what should be activated when pressing PC.
VGA: Pressing PC will activate the VGA input on the system (default).
VNC: Pressing PC will use VNC to show images from your PC (see ‘VNC Settings’ for further information).
NOTE
* - Requires option ‘Presenter’. To check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’.