Filter
Top Products
D14324.04—DECEMBER 2009
26
Profile series with Codec C60
Administrator Guide
Contents Introduction Getting started About the menus The settings menu Settings Library Cameras Appendices Contact us
The Advanced menu
How to change the menu password
If a menu password has been set you will be asked
to enter a password to get access to the Advanced
menu.
When turning on the system for the first time, the
password is not set.
NOTE! The menu password will only apply to the
Advanced menu. The codec and the web interface
can be password protected with an administrator
password. See the Password protection section in
the Appendices for a detailed description.
!
When you define or change a password
make sure you save a copy of the password
in a safe place.
Setting a menu password
1. On the remote control, press the # key
to toggle between lower or upper case
characters and numbers: abc/ABC/123
2. Enter the password. The password you
enter is hidden, and each character is
replaced with a star (*).
3. Press Save to save the changes, or
Cancel to leave without saving.
4. Press Home ( ) to exit.
The Advanced menu can be password
protected. If so, type in the password and
press OK to proceed or Cancel to go
back to the Settings menu
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
The settings menu