Filter
Top Products
D14324.04—DECEMBER 2009
50
Profile series with Codec C60
Administrator Guide
Contents Introduction Getting started About the menus The settings menu Settings Library Cameras Appendices Contact us
The PrecisionHD 1080p camera,
cont...
Best view—Face recognition
This camera is capable of face recognition when used with
TANDBERG C60/C90 Codecs. Consequently, the functionality is
subject to change without prior notice in order to take advantage of
further developments.
NOTE: Observe that the Best view feature is still a preview feature.
The face recognition system aims to search for faces in order to
optimize the picture frame, hence the name Best view. Once a face
or group of faces has been detected camera zoom and camera angle
will be changed accordingly to obtain an optimal presentation on the
screen.
Read this before using Best view:
• The Best view optimization process may take up to 5 seconds.
• The detection of faces works better when people look towards the
camera.
• The area from the eyebrows down to just below the lips should be
uncovered.
• Beard is normally not a problem.
Select Selfview to be shown.
Using Best view
Note that Best view works with TANDBERG
C60/C90 Codecs only!
1. Press the Layout key on the remote
control to display the Layout menu. Select
Selfview to be shown as required.
2. Press the Home key on the remote
control to display the Home menu and
select Camera control
3. Press the second soft button on the remote
control to display the Preset menu. Select
Best view from the menu press the OK key
on the remote control to start the Best view
optimization process.
4. Look towards the camera for about five
seconds. The system will look for human
faces and adjust the zoom and camera
angle to obtain a best fit.
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Cameras