Filter
Top Products
Instrument Operation Teledyne API Ultrafine Particle Monitor - Model 651
50 07506C DCN6727
On this screen, only the network setting has been specified.
On this screen all network settings have been specified.
ADDRESS
SETUP | NETWORK SETUP | ADDRESS
Allows you to specify an IP address for your network. To set the IP
Address, follow these instructions:
1. Press the numbers on the on-screen keypad.
2. When you have selected all the numbers, press ENTER. The IP
Address is now recorded and displayed on the screen.
3. Press BACK to return to the Network setup screen where the IP
address is now displayed.