Filter
Top Products
A-38 Configuration Quick Reference
Configuration
Quick-Reference
S-Register/AT Command Cross-Reference
This section shows the modem’s S-Registers cross-referenced with AT Commands
and front panel options. (For details on S-Registers, refer to Chapter 5, Using the AT
Automatic Calling Interface.)
Table A-3.
S-Register Cross-Reference
S-Register AT Command Front Panel Option
S0—Ring Count to Answer On AT
*
AA5 Answer=Using S0
S1—Ring Count ——
S2—Escape Code Character ——
S3—Carriage Return Character ——
S4—Line Feed Character ——
S5—Backspace Character ——
S6—Wait for Dial Tone AT
*
BD2 Blind Dial=S6
S7—Wait for Data Character AT
*
DD9 Dial Wait=S7
S7—Wait for Data Character AT
*
TT5 Call Timeout=S7
S8—Pause Time for Pause Delay Dial
Modifiers
AT
*
DP4 Pause Delay=S8
S10—Carrier Loss Hang Up Delay AT
*
CD3 DCD Loss Dis=S10
S11—DTMF Tone Duration AT
*
TL1 Tone Length=S11
S12—Escape Code Guard Time ——
S18—Test Timer ——
S25—Delay Before Looking for DTR ——
S26—RTS/CTS Delay AT
*
DL4 RTS/CTS Delay=S26
S30—DTE Inactivity Disconnect AT
*
SI5 Inactivity=S30
S38—Disconnect Buffer Delay AT
*
DB3 Delay=S38
S45—Access Security Tone Duration ——
S46—Access Security Lead Digit Delay
Timeout
S96—Signalling System #5
AT
*
S96
=0 to 1
S97—Break Signal Duration
AT
*
S97
=0 to 39
S98—AC Detect
AT
*
S98
=0 to 1
S99—V.32 Training Time
AT
*
S99
=0 to 216