C-1
Appendix C
FET Specific Menus
This appendix describes the C-SPY menus that are specific to the FET.
Topic Page
C.1 EMULATOR C-2
C.1.1 EMULATOR->RELEASE JTAG ON GO C-2
C.1.2 EMULATOR->RESYNCHRONIZE JTAG C-2
C.1.3 EMULATOR->INIT NEW DEVICE C-2
C.1.4 EMULATOR->SHOW USED BREAKPOINTS C-2
C.1.5 EMULATOR->ADVANCED->GENERAL CLOCK CONTROL C-2
C.1.6 EMULATOR->ADVANCED->EMULATION MODE C-2
C.1.7 EMULATOR->ADVANCED->MEMORY DUMP C-3
C.1.8 EMULATOR->ADVANCED->BREAKPOINT COMBINER C-3
C.1.9 EMULATOR->STATE STORAGE C-3
C.1.10 EMULATOR->STATE STORAGE WINDOW C-3
C.1.11 EMULATOR->SEQUENCER C-3
C.1.12 EMULATOR->”POWER ON” RESET C-3
C.1.13 EMULATOR->SECURE C-3
C.1.14 EMULATOR->GIE on/off C-4
C.1.15 EMULATOR->LEAVE TARGET RUNNING C-4
C.1.16 EMULATOR->FORCE SINGLE STEPPING C-4
C.1.17 EMULATOR->SET VCC C-4