Filter
Top Products
4/00, TecraToshiba TRR Page 26
Tecra 750 Series Disassembly Overview, (cont.)
CAUTION: When you remove the FL, be
careful not to let any dust or other foreign
matter contaminate the LCD panel. Any
contamination can affect the performance of
the unit.
To remove the FL, follow the steps below.
1. Turn off the power to the computer.
Disconnect the AC adapter and all
external cables connected to the
computer.
2. Remove the battery pack, display mask,
FL inverter board, LCD module, and
microphone.
3. Remove the tape covering the FL
cable.
4. Remove one thin-head silver screw
and two M2x4 silver screws securing
the metal FL cover.
5. Carefully slide the metal FL cover
about 2 mm away from the FL cables
and lift it up.
6. Lift out the FL cable and the FL.
î
í
CAUTION: When you remove the FL, be
careful not to let any dust or other foreign
matter contaminate the LCD panel. Any
contamination can affect the performance of
the unit.
To remove the FL, follow the steps below.
1. Turn off the power to the computer.
Disconnect the AC adapter and all
external cables connected to the
computer.
2. Remove the battery pack, display mask,
FL inverter board, LCD module, and
microphone.
3. Remove two strips of tape securing
the FL cable and metal FL cover.
4. Remove two thin-head screws
securing the metal FL cover.
5. Slide the metal FL cover forward about
2 mm and lift it off.
6. Lift out the FL cable and the FL holder.
7. Remove the FL tube from the FL
holder.
í
è