Filter
Top Products
4/00, TecraToshiba TRR Page 16
Tecra 750 Series Disassembly Overview, (cont.)
To disassemble the HDD Pack, follow the steps
below.
1. After removing the HDD pack, lift the left
end of the cover up.
2. Slide the cover all the way to the right.
3. Lift the cover up and remove it.
4. Remove four M2.5x6 silver screws
from HDD pack.
5. Remove the HDD tray and connector
cover.
6. Remove four M3x4 flat-head screws.
7. Remove the flexible cable.
CAUTION: Do not try to disconnect by
pulling on the flexible cable.
CAUTION: Do not apply pressure to the top
or bottom of the HDD.
ê
î
í