Toshiba A135 Personal Computer User Manual


 
4 Replacement Procedures
4.14 FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board, first remove the battery pack, display assembly, and display
mask; then follow the steps below.
1. Remove the M2x3 black screw securing the FL inverter board to the LCD display assembly.
Figure 4-43 Removing the screws
2. Disconnect the two connectors on either side of the board.
Figure 4-44 Removing the connectors
4-40 Satellite A130/ A135 Series Maintenance Manual