Filter
Top Products
4 Replacement Procedures
4.15 LCD Module
Removing the LCD Module
To remove the LCD module, first remove the display assembly, display mask, and FL inverter
board and then follow the steps below.
1. Lift the LCD module from the top chassis.
Figure 4-46 Removing the LCD Module
2. Remove six M2x3 screws securing the LCD module bracket to the LCD module.
Figure 4-47 Removing the bracket screws
NOTE: If the LCD module malfunctions, remove the LCD cable and LCD bracket. Then
replace the whole LCD module unit.
4-42 Satellite A130/ A135 Series Maintenance Manual