Filter
Top Products
1. OUTLINE EO18-33025
1.5 Supply Specifications
1-10
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC approved media.
2. When using a media roll of 76.2-mm (3”) inner core diameter, the 3”-Diameter Media Shaft included in
the optional External Media Roll Hanger is required.
3. Precaution for use of labels
When labels are used for printing, please only use outside wound labels.
Use of an inside wound label causes a paper jam.
Outside wound Inside wound
Label Usable Not usable
Tag Paper Usable Usable
1.5.2 Detection Area of the Transmissive Sensor
The Transmissive sensor is fixed and positioned at 6.35 mm right of the center of the media path.
The Transmissive Sensor detects a gap between labels, as illustrated below.
1.5.3 Detection Area of the Reflective Sensor
The figure below illustrates the relation between the head effective print width and media width.
(for GS14 Type)
(for TS14 Type)
Min. 2 mm
(Min. 6 mm:
cut mode)
Min. 8 mm
Sensor position
A
rea to be detected.
Label
Gap
Label
Sensor position
Media feed direction
Print side
6.35mm
2 mm
112.0 mm (Max. media width)
108.0 mm
±
0.2mm
(Head Effective Print Range)
Out of print range
Out of print range
2 mm
Print head element
112.0 mm (Max. media width)
3 mm
106.0 mm
±
0.2mm
(Head Effective Print Range)
Out of print range
Out of print range
3 mm
Print head element