Filter
Top Products
5. MAINTENANCE EO18-33025
5. MAINTENANCE
5-1
5. MAINTENANCE
WARNING!
DO NOT USE a spray cleaner containing flammable gas for cleaning this product, as this may cause a fire.
This section presents the clean tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
• Cotton swab (Head cleaner pen)
• Lint-free cloth
• Vacuum / Blower brush
• 100% ethanol
2. The cleaning process is described as following
Printer Part Method Interval
1. Always turn off the printer before
cleaning the print head.
2. Allow the print head to cool for a
minimum of one minute.
3. Use a cotton swab (Head cleaner
pen) and 100% ethanol to clean the
print head surface.
Clean the print head when changing a new
label roll.
Print Head
Platen Roller
1. Turn the power off.
2. Rotate the platen roller and wipe it
thoroughly with 100% ethanol and a
cotton swab, or lint-free cloth.
Clean the platen roller when changing a new
label roll.
Tear Bar/Peel Bar
Use the lint-free cloth with 100%
ethanol to wipe it.
As needed
Sensor Compressed air or vacuum Monthly
Exterior Wipe it with water-dampened cloth As needed
Interior Brush or vacuum As needed