Filter
Top Products
3. REPLACING THE IMPORTANT PARTS EO18-33025
(Revision Date: Mar. 27, 2009)
3.1 Replacing the Top Cover
3-1
3. REPLACING THE IMPORTANT PARTS
Lubrication
Any machine is generally in its best condition when delivered; therefore, it is necessary to try to
keep this condition. Unexpected failure occurs due to lack of oil, debris, or dust. To keep its
best condition, periodically clean the machine and apply proper kinds of oil to each part in
which lubrication is needed. Although the frequency of lubrication varies according to how
much the machine is used, at least it is necessary to lubricate before the machine becomes dry.
It is also necessary to wipe off excessive oil as it collects dirt.
NOTE: Before replacing the important parts, store the printer parameter data on a PC with the B-EV4
setting tool. Uploading the data from the PC to the printer after replacement restores the
printer parameter setting to the status prior to replacement. Regarding the details of B-EV4
setting tool, refer to the B-EV4 Setting Tool Specification posted on the Barcode Knowledge Pot.
URL of Barcode Knowledge Pot
http://barcode.toshibatec.co.jp/Ris/products/barcode/support/en/index.php
WARNING
!
1. Turn off the power switch and disconnect the DC plug of the AC Adapter and the
RS-232C cable before replacing any parts.
2. Follow all manual instructions. Failure to do so could create safety hazards such as
fire or electrocution.
NOTES:
1. Manual instructions must be followed when installing option kits or adding cables to
avoid system failures and to insure proper performance and operation.
2. Failure to follow manual instructions or any unauthorized modifications, substitution or
change to this product will void the limited product warranty.
CAUTION!
1. To protect the connector pins or component from static discharge, do not touch them
with bear hand.
2. Use electrostatic free form and the original carton for transportation.
3. Keep your work environment static free to avoid damage to the printer.
4. Do not remove any connectors from the printer within 10 sec. after unplugging the
power cord.
CAUTION!
1. Lubrication: During parts replacement
2. Kinds of oil: FLOIL G-488: 1kg can (part No.: 19454906001)