Filter
Top Products
3. REPLACING THE IMPORTANT PARTS EO18-33025
(Revision Date: Mar. 27, 2009)
3.7 Replacing the Gear Cover
3-17
3.7 Replacing the Gear Cover
1. Refer to section 3.2 to remove the lower cover.
2. Use the Phillips screwdriver to remove the 4 screws.
3. Remove the gear cover.
4. Remove the each gear.
NOTE: Between 200 dpi printer and 300 dpi printer, the number of gears and the position
of the motor pulley differ. Be careful of the orientation of the gear when replacing.
SM-3x6 Screw
Gear Cove
r
LUBRICATION
Gear: FLOIL
300dpi model
200dpi model
LUBRICATION
Gear: FLOIL
Motor Pulley
Motor Pulley