Filter
Top Products
Windows Setup Guide for ST-6500/ST-6500-C7
TOSHIBA TEC CORPORATION
11
3. Setup on Windows NT 4.0
1) Setting up BIOS
By pressing the F2 key on the keyboard when the machine starts up, the BIOS Setup Menu
is selected. Select the following item for BIOS setup.
[Exit]-> Load Setup Defaults (DOS/WinNT/Other)
2) Installing Windows
Connect the PS/2 mouse and install Windows NT 4.0.
IMPORTANT:
* When Windows NT is installed without connecting the PS/2 mouse, the touch
panel driver cannot be installed. Be sure to connect the PS/2 mouse before
installing Windows NT.
3) Installing the Service Pack (SP)
Some drivers require a new version service pack. Install the required service pack.
4) Installing the 810E2 Chipset Software
w Installing the Intel 810/815 Chipset Family Graphics Driver
To enable the CRT display, this driver must be installed.
Execute Chipset¥Graphics¥Win9x¥Graphics¥Setup.exe contained in the driver kit, and
install “Intel 810/815 Chipset Family Graphics Driver.”
w Installing the Intel
®
PRO/100 VE Network Connection Driver
Execute Chipset¥LAN¥100pdisk.exe contained in the driver kit and extract the files onto the
hard disk. Select [Network] on the Control Panel and execute “Network Setup Wizard.”