Filter
Top Products
Windows Setup Guide for ST-6500/ST-6500-C7
TOSHIBA TEC CORPORATION
8
IMPORTANT:
* If the SM712 VGA board (SMI) has been inserted on the machine, when Windows
98 is installed, the on-board VGA (Intel810E2) cannot be used after Windows 98
has been installed. On the “Device Manager” tab of the “System Properties”
screen, the on-board VGA (Intel810E2) is marked with “!”, which indicates the
device is disabled. (See the screen below.)
To solve this problem, remove the SM712 VGA board from the machine, then
start up the PC. It will make the on-board VGA (Intel810E2) enabled.