Toshiba e-Studio237 All in One Printer User Manual


 
18 Features of e-STUDIO167/207/237
Features of e-STUDIO167/207/237
The black-and-white copier, the e-STUDIO167/207/237 has realized the copying speed of 16
copies per minute
*1
(the e-STUDIO167), 20 copies per minute
*1
(the e-STUDIO207) and 23 cop-
ies per minute
*1
(the e-STUDIO237). They can all serve as a printer and a scanner when they
are connected to your PC with a USB cable.
*2, *3
The e-STUDIO167/207/237 also has functions as a Fax, a network scanner and a network
printer, namely, it remarkably saves time and space at your workplace.
Lightweight and space-saving equipment with more emphasis on basic functions
y The receiving tray is relocated to the equipment’s inner side, occupying as little space as
possible.
y Operability of the control panel has been upgraded with its larger buttons and LCD screen.
y A wide range of paper sizes from LD to ST-R are acceptable.
y The bypass tray equipped as a standard unit makes copying on various media types such as
overhead transparencies possible.
y Scanning data with a TWAIN driver is enabled as a standard function.
y A rich variety of convenient copying functions are adopted.
Functions extended by various options
y The Reversing Automatic Document Feeder (RADF) / Automatic Document Feeder (ADF)
dramatically saves the time when you need to copy massive amounts of originals.
y The Scanner Upgrade Kit promotes paperless at your office.
y The Fax Kit can add a function as a Fax machine.
y The Network Printer Kit works as a shared printer at your office.
y The Paper Feed Unit (PFU), the Paper Feed Pedestal (PFP) and the Drawer Module can
add maximum 4 more drawers.
Ecological energy-saving design
y The toner recycling system in which used toner is recovered and reused is adopted.
y Its warm-up time has become be approx. 25 seconds.
*4
y The low power mode, which reduces unnecessary electric power by having the fuser unit
temperature lowered while the equipment is left inactive, is adopted.
y The sleep mode, which maintains the smallest possible power consumption during the
equipment’s inactive period after it has not been used within a specified period of time, is
adopted.
*1 These speeds are realized in the non-sort mode, when LT originals placed in a portrait direction are con-
tinuously copied and the Reversing Automatic Document Feeder (optional) / Automatic Document
Feeder (optional) is not used.
*2 When this equipment is used as a printer, the co-packed software needs to be installed into your PC.
*3 When the equipment is used as a network printer with the Network Printer Kit (optional) installed, it can-
not be connected with your PC with a USB cable and used as a local printer.
*4 This is the value when the room temperature is 20 °C (68 °F) or more at rated power input.