Filter
Top Products
Paper Selection 67
Paper Selection
You can select the size of copy paper in two ways; one is automatic paper selection in which the
equipment automatically selects copy paper of the same size as the original, and the other is
manual paper selection in which you can select the desired paper size manually.
Automatic paper selection (APS):
The equipment detects the size of the original placed and automatically selects copy paper of
the same size as the original.
The following sizes of originals are available:
LD, LG, LT, LT-R, COMP, ST-R (The COMP size paper can be used only when the mixed-size
copying mode is used.)
Manual paper selection:
You can select the desired size of copy paper manually. This function can be used in a case the
APS cannot be used, such as when originals are non-standard sizes or overhead transparen-
cies.
Automatic paper selection (APS)
When you place a standard size original, the equipment detects its size and automatically
selects copy paper of the same size as the original.
The following sizes of originals are available:
LD, LG, LT, LT-R, COMP, ST-R (The COMP size paper can be used only when the mixed-size
copying mode is used.)
The equipment may not be able to correctly detect the size of the originals listed below. Use
manual paper selection for the following originals:
y Highly transparent ones (e.g. overhead transparencies, tracing paper)
y Wholly dark ones or ones with dark borders
y Non-standard size ones (e.g. newspapers, magazines)
P.68 “Manual paper selection”
1
Place paper in the drawer.
Register the size of the paper into the equipment in advance.
P.48 “Preparation 3 - Registering Size of Paper Placed”
2
Place the original.