Filter
Top Products
1 PREPARATION
32 Description of Each Component
Control panel
1. APS/AMS selecting button/lamps
Automatic paper selection (APS): The equipment detects the size of original and automat-
ically selects the same size of copy paper.
P.67 “Paper Selection”
Automatic magnification selection (AMS): Set the size of copy paper to be used in
advance. The equipment then detects the size of original and automatically selects the most
suitable reproduction ratio to the copy paper.
P.72 “Automatic magnification selection (AMS):”
2. [MIXED SIZE] button/lamp
Use this to copy originals whose sizes are different.
For the details of the mixed-size copying, see the following page:
P.70 “Copying Different Sizes in One Go - MIXED-SIZE COPYING -”
3. [ENERGY SAVER] button
Use this to let the equipment enter into the energy saving mode when the equipment is not
used.
For the details of the energy saving mode, see the following page:
P.37 “Saving energy when not in use - Energy saving mode -”
4. [INTERRUPT] button
Use this to interrupt the copy job in process and perform another one (= interrupt copying).
For the details of interrupt copying, see the following page:
P.60 “Interrupting copying and making another copy - Interrupt copy -”
5. [USER FUNCTIONS] button
Use this to change the equipment’s default settings.
For the details of default setting change, see the following page:
P.115 “CHANGING EQUIPMENT’S SETTINGS”
2789
22
1 10 11
15202425 23
1312
1418 16171921
4 563