Filter
Top Products
5 CONFIGURING NETWORKS (EQUIPMENT)
44 HTTP Configuration
HTTP Configuration
To use a web-based utility TopAccess, HTTP network server service must be enabled. This ser-
vice must be enabled also for IPP printing.
1
Press the [USER FUNCTIONS]
button when the ready screen
is displayed.
The “user functions mode” main screen
appears.
2
Press or to select INI-
TIAL SETUP, and then press
the [ENTER] button.
3
Press or to select NET-
WORK, and then press the
[ENTER] button.
4
Press or to select HTTP,
and then press the [ENTER]
button.
5
Press or to select HTTP
SERVER, and then press the
[ENTER] button.
6
Press or to select
ENABLE for enabling HTTP
network server, or select DIS-
ABLE for disabling it. Then
press the [ENTER] button.
The screen returns to the one shown in
step 5.
7
Press or to select PRI-
MARY PORT NUMBER, and
then press the [ENTER] but-
ton.
USER FUNCTIONS
00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
HTTP
01.
HTTP SERVER
02.
PRIMARY PORT NUMBER
03.
SECONDARY PORT NUMBER
HTTP SERVER
1.ENABLE
2.DISABLE
HTTP
01.
HTTP SERVER
02.
PRIMARY PORT NUMBER
03.
SECONDARY PORT NUMBER