Filter
Top Products
197
Using ConfigFree® with your Toshiba Computer
ConfigFree
®
Utilities
5.375 x 8.375 ver 2.3
To review the current Toshiba Wireless Projector settings and
change them if necessary:
1 Click the icon in the System tray.
2 Use the pointing device to select the Toshiba Wireless
Projector (DPJ), then click Settings. The Quick Connect
properties dialog box appears.
3 Complete the settings. Refer to the online Help if necessary.
4 Click OK.
Because the wireless LAN’s default connection setting is for Ad Hoc
mode, the Toshiba Wireless Projector will not connect if the projector
is set to Infrastructure mode. If this occurs, you can change the
wireless LAN’s connection setting to Infrastructure mode to match
the settings on the projector.
(Sample Image) Projector icon when connected with Quick Connect
If the wireless mode for the wireless setting is set for 5 GHz
(802.11a), Quick Connect changes this mode to 2.4 GHz (802.11b)
and then connects to the projector.
NOTE