Filter
Top Products
4 Replacement Procedures
4.12 Display Assembly
Removing the Display Assembly
To remove the display assembly, first remove the battery and any optional devices. Also remove
the keyboard, and the wireless LAN unit as described in the previous sections. Then follow the
steps below:
1. Remove the keyboard and the wireless LAN unit. Separate the wireless LAN antenna
connectors from the top cover and place them on a side out of the way. Also remove the
Bluetooth connector from the module.
2. Disconnect the LCD power cable and speaker cable from the top cover.
Figure 4-37 Disconnecting all cables
3. Remove two M2.5x6 screws securing the LCD assembly from the rear side.
Figure 4-38 Disconnecting the rear screws
4-34
[CONFIDENTIAL]
Satellite M50 Series Maintenance Manual