Filter
Top Products
4 Replacement Procedures
4-36
[CONFIDENTIAL]
Satellite M50 Series Maintenance Manual
Installing the Display Assembly
To install the display assembly, follow the steps below and refer to the figures in the preceding
section.
1. Seat the display assembly taking care not to crush to the LCD display cable, the LCD power
cable, the wireless LAN antenna connector, or the Bluetooth connector.
2. Secure two M2.5x6 black screws to each hinge to connect the assembly to the top cover.
3. Secure two black M2.5x6 black screws to the computer’s rear side. They hold the display
assembly in place.
4. Feed the wireless LAN module’s antennae wires through the small hole on the system board
towards the rear side.
5. Connect the Bluetooth connector to the Bluetooth module.
6. Connect the LCD power cable to the top chassis.
7. Reinstall the keyboard and wireless LAN module.