Filter
Top Products
4 Replacement Procedures
4.20 VGA Module
Removing the VGA Module
To remove the VGA module, you have to first remove the keyboard, top cover, and system board.
Then follow the steps below:
1. Remove the two hexagonal screws securing the VGA port connector to the chassis.
2. Remove the M2.5x6 screw securing the VGA module to the chassis.
Figure 4-68 Removing the VGA module screw
3. Remove the VGA module while taking care to remove the VGA and USB port connectors
from their openings on the chassis.
Satellite M50 Series Maintenance Manual
[CONFIDENTIAL]
4-59