Filter
Top Products
4 Replacement Procedures
4.14 Touch Pad
Removing the Touch Pad
To remove the Touch Pad, first remove the battery pack, keyboard, and top cover, and then
follow the steps below:
1. Disconnect the Touch Pad FFC cable from the Touch Pad.
2. Remove one M2.5x3 screw securing the Touch Pad Bracket to the rear side of the top cover.
Figure 4-45 Removing the touch pad screw
3. Remove the bracket.
Figure 4-46 Removing the touch pad bracket
4-40
[CONFIDENTIAL]
Satellite M50 Series Maintenance Manual