Filter
Top Products
4 Replacement Procedures
4.18 Fan & CPU
Removing the Fan & CPU
To remove the Fan, Heat Sink, and CPU, you must first remove the display assembly, keyboard,
top cover and system board, and then follow the steps below:
1. Remove two M2.5x3 screws securing the fan from the top side of the system board.
Figure 4-59 Removing the fan screws from the top of the system board
2. Turn the system board upside down. Remove the four M2.5x6 screws from the heat sink.
Satellite M50 Series Maintenance Manual
[CONFIDENTIAL]
4-51