Filter
Top Products
4 Replacement Procedures
4. Remove the Touch Pad by lifting it gently.
Figure 4-47 Removing the touch pad
Installing the Touch Pad
To install the Touch Pad, follow the steps below and refer to the figures in the preceding section:
1. Turn the top cover upside down and place the Touch Pad, and the Touch Pad Bracket, in
position on top.
2. Secure the Touch Pad bracket with one M2.5x3 screw.
3. Connect the Touch Pad FFC cable to the Touch Pad.
Satellite M50 Series Maintenance Manual
[CONFIDENTIAL]
4-41