Filter
Top Products
4 Replacement Procedures
4.15 Direct Play Button Module
Removing the Direct Play Button Module
To remove the module, first remove the battery pack, keyboard, and top cover, and then follow
the steps below:
1. Turn over the top cover and remove three M2.5x3 screws securing the direct play button
module to the rear of the top cover.
Figure 4-48 Removing the direct play button module screws
2. Disconnect the FCC cable from the system board. Lift and remove the module.
Figure 4-49 Removing the direct play button module
4-42
[CONFIDENTIAL]
Satellite M50 Series Maintenance Manual