Filter
Top Products
4 Replacement Procedures
Satellite M50 Series Maintenance Manual
[CONFIDENTIAL]
4-39
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding section.
1. Seat the top cover and secure the upper FFC cable (from direct play button module) and
Touch pad FFC cable to the computer’s top chassis.
2. Attach the USB and LAN cables.
3. Secure the top cover with three M2.5x6 screws.
4. Turn the computer upside down and secure the following screws:
• M2.5X6: five screws, two from the battery compartment, and three from the HDD
compartment
• M2.5X9: eleven screws from the back panel