Filter
Top Products
4 Replacement Procedures
4.21 Display Mask
Removing the Display Mask
To remove the display mask, first remove the display assembly as described earlier, and then
follow the steps below:
1. Remove four M2.5x6 screws securing the display mask to the LCD module.
Figure 4-70 Removing the display mask screws
2. Carefully insert your fingers between the display mask and the LCD panel, and pry open the
snaps. Start with the four snaps at the top of the display mask. Continue unsnapping the
display mask along the two sides and the bottom edge to remove the display mask.
Figure 4-71 Removing the display mask
Satellite M50 Series Maintenance Manual
[CONFIDENTIAL]
4-61