Toshiba ML3054 Projector User Manual


 
User’s Manual 9-20
Optional Devices
Using REGZA Link (PC Control)
Toshiba notebooks with REGZA Link include a Toshiba utility dedicated to
take advantage of its capabilities which can allow you to:
Use the TV remote control to output the computer screen onto the TV
screen.
Use the TV remote control to launch, operate and close applications on
your computer.
Turn on the TV when the HDMI output is selected using the Fn + F5
key.
Switch the video output (HDMI or LCD) when executing certain desktop
icons.
Enable/Disable the REGZA Link function on the computer.
i.LINK (IEEE1394)
i.LINK ( IEEE1394), is used for high-speed data transfer between a range
of compatible devices such as:
Digital video cameras
Hard disk drives
Magneto Optical drives
Writable optical disc drives
Precautions
Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is
a particular risk that some frames will be deleted in the case of
digital video transfer. TOSHIBA assumes no liability for such loss of
data.
Do not transfer data in areas where static electricity is easily
generated or in areas subjected to electronic noise. Data can be
destroyed.
If you are transferring data through an IEEE1394 hub, do not
connect or disconnect other devices from the hub during data
transfer. There is a likelihood that data will be damaged. Connect all
devices to the hub before you turn on the computer’s power.
You may not use any copyrighted video or music data copied from a
video camera except for your personal enjoyment.
Some models are supported with the REGZA Link.
i.LINK uses a four-pin connector which does not carry any electric current -
therefore. External devices will need their own power supply in order to
operate.