Filter
Top Products
4 Replacement Procedures 4.17 LED / Power Button Board
4.17 LED / Power Button Board
Removing the LED / Power Button Board
To remove the LED / Power Button Board, first remove the battery pack, then follow the
steps below.
1. Remove the keyboard, HDD, main module and top cover.
2. Place the top cover face down.
3. Remove four M2.5×3 silver screws securing the LED / power button board.
Remove LED / power button board.
Fig 4-27: Removing the LED/power button board
4-50 Satellite P20-25 Series Maintenance Manual