Filter
Top Products
4 Replacement Procedures 4.21 Direct Play Button Board
4.21 Direct Play Button Board
Removing the Direct Play Button Board
To remove the direct play button board, first remove the battery pack, then follow the steps
below.
1. Remove the keyboard, HDD, main module and top cover.
2. Release the direct play button FFC from the system board.
3. Remove two M2.5×6 screws securing the direct play cover assembly.
4. Ease the direct play cover assembly forward through the front panel.
Fig 4-36: Removing the Direct Play cover assembly
5. Remove one M2×3 screw securing the direct play button board.
6. Remove two M2×3 screws securing the button board to the bracket. Lift off the
button board.
4-62 Satellite P20 Series Maintenance Manual