Filter
Top Products
4 Replacement Procedures 4.27 Display Mask
4.27 Display Mask
Removing the Display Mask
To remove the display mask, first remove the battery pack, then follow the steps below.
1. Remove the main module, HDD, keyboard, top cover and display assembly.
2. Remove six mask seals to expose six screws securing the display mask.
3. Remove two M2×3 screws from the top of display assembly and another four
M2.5×6 screws that were covered by the mask seals.
Fig 4-44: Removing the display mask screws
4-76 Satellite P20-25 Series Maintenance Manual