Filter
Top Products
4.18 TouchPad 4 Replacement Procedures
Installing the TouchPad
To install the TouchPad, follow the steps below and refer to the figure in the preceding
section.
1. With the top cover upside down, place the TouchPad and TouchPad Button Board
in position. Secure the TouchPad Button Board with two M2.5×3 silver screws.
2. Position the TouchPad cover and secure with five M2.5×3 silver screws.
3. Connect the TouchPad board FPC cable to both the TouchPad button board and
the TouchPad.
Satellite P20-25 Series Maintenance Manual 4-53