Filter
Top Products
19
GB
TF 610 TOSHIBA
Reception of documents
If the line is reserved exclusively for fax
operation.
Set standby mode
If your fax machine is connected to the
PSTN or the PABX, there are four different
ways of receiving documents.
The fax machine switches over to
reception as soon as the line rings (see
page 25).
The fax machine is always
activated, even if the call is
initiated by a voice partner.
Reception of documents
If the line is used primarily for telephone traffic
Manual reception
Press the AUTO key.
The call must be accepted manually; the
fax machine is not activated when the
line rings. If you wish to transmit a
document, you must press the START key
of the fax machine.
Ensure that any fax calls can
indeed be accepted; it is always
necessary to press the START
key.
AUTO lamp on:AUTO lamp on:
AUTO lamp on:AUTO lamp on:
AUTO lamp on:
The following reception modes can be
alternatively set by individual setting of
function 38function 38
function 38function 38
function 38 (see page 52 et seq.):
• Fax reception mode
• Telephone/fax mode
• Fax/TAD mode
AUTO lamp off:
Manual reception
Automatic reception
Key functions:
••
••
•
Function 37Function 37
Function 37Function 37
Function 37
Number of rings before the fax
machine picks up the call (1-10)
••
••
•
Function 38Function 38
Function 38Function 38
Function 38
Setting of automatic reception
Press the AUTO key.
The standby mode is indicated with the AUTO
LED. Press the AUTO key to change between
two different reception modes (these are
indicated by the AUTO LED):
LED “AUTO” is lit
LED “AUTO” off