Filter
Top Products
6
GB
TF 610
TOSHIBA
Shake the process unit
several times side to side to ensure even
spread of toner...
... insert the process unit
First slide the green lock lever on the inside left
of the machine to the back. The process unit is
then inserted with its pins into the lateral
guides and placed exactly in position by
applying slight pressure downwards.
Now pull the lock lever forward again.
Then close the top cover and the control panel
cover again.
Now (re)connect your fax machine to the
socket.
A damaged drum will affect the copy
quality. Therefore: Never touch the
drum surface or expose the drum to
sunlight.
To make a good
impression:
a new toner cartridge
After printing many pages, TONER NEAR
EMPTY and later TONER EMPTY appear
on the display. This means you must
insert a new toner cartridge in your fax
machine:
Open the top cover.
Don’t forget: First remove the mains plug from
the socket.
To replace toner:
Slide the green lock lever on the left side of the
machine to the back and remove the process
unit.
Place the process unit on a piece of paper on
an even surface. Lightly tap on the toner
cartridge to prevent any toner residue falling
into the process unit. Pull the tape on the the
toner cartridge upwards before you slide it out
of ist holder.
First shake the new cartridge...
... then place on top of the process unit and
slide it until it locks into place.
Preparation
Preparation