Filter
Top Products
7
GB
TOSHIBA
TF 610
Now: remove the seal.
When holding the protective foil, be sure to
avoid contact with any toner residue.
Now shake the process unit several times
horizontally before you..
... install the process unit again.
Insert the pins into the lateral guides and then,
by applying slight pressure, lower the unit into
the correct position.
Now pull the lock lever forward again.
Never allow hair or dust to get into the process
unit as this will block the proper supply of toner.
Then close the top cover and the control panel
cover.
You can now connect your fax machine to the
mains again.
From time to time:
clean the housing
Never using abrasive materials to
clean your fax machine - the could
cause damage.
Remove the paper cassette
Press down the cassette plate until it locks into
place.
Insert a stack of A4 paper
Prepare the recording paper by flexing and
fanning out the stack to separate the sheets.
Place the paper so that it lies straight in the
cassette with the side to be printed face-down
and don’t forget:
The paper cassette holds a maximum
250 sheets (80 g/m
2
).
Then: Slide the cassette into the slot
until you hear it lock into place.
Do not use damp, wrinkled or torn
paper.
Insert recording paper
Preparation
Preparation