Filter
Top Products
68
GB
TF 610
TOSHIBA
Handling faxes on your PC
Handling faxes on your PC
System requirements
You can also use the features of your fax
machine your PC. The fax functions can
also be used in addition to the printer
function. The following minimum
requirements are essential in this respect:
• IBM compatible PC with i80486
processor or higher
• 8 MB RAM or higher
• Serial (V.24) interface for connection
to the TF 610
• Microsoft Windows 3.11 / 95
operating system
• Fax software
TOSHIBA SmartLinkTOSHIBA SmartLink
TOSHIBA SmartLinkTOSHIBA SmartLink
TOSHIBA SmartLink
Mode Description
PC scanner Scans documents into the PC via the document feeder of the fax
machine.
PC fax, transmission Files created under Windows can be transmitted directly via the
fax machine (i.e. without being printed out)
PC fax, reception Incoming faxes are transferred to the PC as an image file via the
fax machine without being printed out. If the PC is not switched
on, the pages are automatically printed out.
OCR Received faxes or scanned texts are converted into readable
ASCII text with the OCR module.
1. Switch off the PC and the TF 610.
2. Connect the 25-pin sub-D connector to the
corresponding socket on the fax machine,
and secure the connection with the
connector screws.
Connection to the PC
Features
The following features are available in
conjunction with the software TOSHIBA
SmartLinkSmartLink
SmartLinkSmartLink
SmartLink:
The PC fax interface complies
with the
fax class1fax class1
fax class1fax class1
fax class1 standard
Pin assignment of serial cable
Sub-D 9 pin socket (female)
Sub-D 25 pin socket (male)
3. Connect the cable to the serial interface of
your PC.
PC-Fax
Connect the TF 610 before the
installation.