61
GB
TOSHIBA
TF 610
Power saver
The printing unit of your fax machine
requires a heat source of approx. 170°
Celsius to be able to print spontaneously.
This heat source is heated at certain
intervals in order to maintain the
temperature at the required level. This
consumes electricity, and the fan also has
to run constantly. If you wish to save
power or prevent the fan noise, you can
switch off the constant heating facility.
The heating would then only be activated
when a fax is received. The delay involved
before the fax document is printed out is
approx. 1 minute.
Standby mode
Start the menu
Select submenu (2x)
Make your selection for the function
number
Enter function number
Confirm with ENTER
Current setting
Change setting
Confirm with ENTER
Press STOP, return to standby
mode
15-03 19:56 M 100%
2 x
POWER SAVE OFF
POWER SAVE ON
STOP
ENTER
ENTER
Advanced settings
Advanced settings
PARAMETER NUMBER =
_