Filter
Top Products
25
GB
TF 610 TOSHIBA
/
15-03 19:56 M 100%
PROGRAM SETUP DATA
AUTO DELAY 01
AUTO DELAY XX
2 x
Standby mode
Start the menu
Select submenu(2x)
Make your selection
Enter function number
Confirm with ENTER
Set number of rings
Page through the menu...
...until you reach the desired value
Confirm with ENTER
Press STOP, return to standy
mode
No paper, memory full
Paper out
Incoming copy is printed out
ERROR flashes
STOP
ENTER
ENTER
ADD PAPER M 86%
Reception of documents
Reception of documents
Set call counter
If your fax machine is set to automatic
reception (FAX, TEL/FAX, see page 20), it
will switch on as soon as it is called.
Under these circumstances, it is thus not
possible for the call to be intercepted by
the telephone.
However, it is possible for your fax
machine to be set in such a way that - in
the event of a telephone call - it is
activated after a specific delay. The call
counter is used for this purpose. You can
use this facility to set the number of
incoming calls (max. 10) before the fax
machine connects to the line.
Memory reception
Under certain circumstances, the
machine cannot print out any further
incoming copies:
• If there is no recording paper
• If there is a paper jam
In order to prevent problems with
reception, the remaining pages are
buffered in the memory of your fax
machine. Once the problem has been
solved, the document is printed out
automatically.
Do not switch off the power
supply as otherwise the contents
of the memory will be lost.
PARAMETER NUMBER =
_