Filter
Top Products
53
GB
TOSHIBA
TF 610
The following functions (Parmeter)
are available:
Description
Error correction (ECM) is as follows:
ON: Activated
OFF: Deactivated
Transmission report is produced:
ON: After every transmission
CONFIRMATION OFF: Only after
transmission errors.
A part of the document (to recognize it)
can be printed on the report.
REPORT VISUAL ON: print
REPORT VISUAL OFF: print not
Select, if the TX header will be transmitted
to te other party.
ON: Is transmitted
OFF: Is not transmitted
Select, if the actual date and time will be
printed on the footer line of received
documents.
ON: Is printed
OFF: Is not printed
Preset transmission speeds, transmission
BPS = BIT / Sec.
9600 BPS, 7200 BPS, 4800 BPS, 2400 BPS
Preset transmission speed, reception
BPS = BIT / Sec.
9600 BPS, 4800 BPS
Actual COMLINE status
ON COMLINE enabled
OFF COMLINE disabled
ONE only one COMLINE session
Dialling method:DTMF
PULSE DIALLING
Number of redial attempts if transmission
is not successful
02 2 twice
~
10 10 times
Period between redial attempts if
transmission is not successful
30 SEC 30 seconds
~
1 MIN
2 MIN
3 MIN
10 MIN
20 MIN 20 minutes
Period between redial attempts if line is
busy
1 MIN 1 minute
~
10 MIN 10 minutes
Function no.
01
02
03
04
05
06
07
13
20
21
22
23
Function
ECM
CONFIRMATION
FIRST PAGE IMAGE
HEADER PRINT
RECEIVE FOOTER
TX SPEED
RCV SPEED
RDC ACCEPTANCE
DIAL METHOD TONE
REDIAL TIMES
REDIAL INT.
DUAL INTERVAL
Advanced settings
Advanced settings
]
✽ ) This function may not be available in machines in certain countries.