Filter
Top Products
4.1 General 4 Replacement Procedures
Removing the Optional Memory
Remove the optional memory (module) according to the following procedures and Figures 4-
4, after checking that the computer is turned off in boot mode.
CAUTION: Remove the optional memory after turning off the computer. If this is
violated, the computer or memory can be damaged.
1. Turn the computer upside down.
2. Release one optional memory cover securing the screw.
3. Remove the memory cover.
CAUTION: Do not touch the connectors on the memory modules or in the computer.
Contaminated connectors can cause memory access problems.
Memory cover
Memory cover secrue screw
Memory
Slot A
Slot B
Figure 4-4 Removing the optional memory
4. Spread out the two memory lock latches so that the memory module pops up.
5. Pull the memory module up and out at an angle, using care to avoid touching the
connectors.
CAUTION: If you install only one memory, please install it in slot A, the lower one.
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual 4-13