Toshiba PRO M200 Laptop User Manual


 
4 Replacement Procedures 4.3 ODD Bay Module
4.3 ODD Bay Module
Removing the ODD Bay Module
NOTE: The installation and removal procedures are the same for all the modules that
can be installed in the ODD bay. See the appropriate sections for the disassembly
procedures of specific modules.
Remove the ODD bay module according to the following procedures and Figures 4-7.
1. Turn the computer upside down.
2. Remove the M2.5x1 black flat head screw.
3. Push out on the ODD bay module in the direction of the arrow.
CAUTION: Handle the ODD bay module carefully it can become hot during operation.
ODD bay module
M2 5x1
black
flat head
screw
.
Figure 4-7 Removing the ODD bay module
4-18 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual