Filter
Top Products
4 Replacement Procedures 4.4 Speaker Cover and Keyboard
Installing the Speaker Cover and Keyboard
Install the speaker cover and keyboard according to the following procedures and Figure 4-9,
4-10 and 4-11.
1. Connect the keyboard cable to CN9 on the system board.
2. Secure the keyboard with two M2x2 black flat head screws.
3. Place the speaker cover in the correct position and secure the following 13 latches, in
that order:
- Eight bottom latches
- Five front latches
4. Close the display and turn the computer over.
5. Secure the speaker cover with one M2x5 black flat-head screw screws.
4-24 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual