Filter
Top Products
4.7 Display Assembly 4 Replacement Procedures
4.7 Display Assembly
Removing the Display Assembly
CAUTION: Use care to avoid that the antenna cable is not caught between the display
assembly and computer.
Remove the display assembly according to the following procedures and Figures 4-14, 4-15.
1. Turn the computer so the back is facing you and remove two M2.5x2 black flat head
screws.
2. Restore the normal computer placement and open the display panel.
M2 5x2 black flat head screw.
Figure 4-14 Removing the screws from the back of the computer
3. Disconnect the LCD/FL cable from CN7 on the system board.
4. Remove four M2.5x4 black flat head screws securing the LCD module to the top
cover.
5. Remove the wireless antenna cables from the top cover.
6. Remove the display module.
Satellite MA200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual 4-29