Filter
Top Products
4.17 LCD Module 4 Replacement Procedures
4.17 CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-32.
1. Disconnect the CCD cable from the CCD module connector and remove the CCD
board.
CCD board
MIC
CCD board cable
Figure 4-32 Removing the CCD board and MIC
2. Lift the MIC from the display rear cover.
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual 4-55