Filter
Top Products
4 Replacement Procedures 4.10 USB and CRT Cable, and Bluetooth card
4.10 USB and CRT Cable, and Bluetooth Card
Removing the USB and CRT Cable, and Bluetooth Card
Remove the USB board, CRT Cable and bluetooth board according to the following
procedures and Figures 4-19.
1. Disconnect USB two cables from CN5 and CN4 on the system board.
2. Remove two M2x2 black flat head screws securing the USB board.
3. Remove the USB board and CRT from base enclosure.
4. Remove one M2x1 black flat head screws securing the Bluetooth Card.
5. Remove Bluetooth Card flat cable from CN16 on the system board.
6. Remove the Bluetooth Card from base enclosure.
Blue tooth card
Blue tooth card flat cable
CN16
M2x1 black flat head screw
CN4
CN3000
CN3001
CN5
USB board and RTC
M2x3 black flat head screw
BRKT
Figure 4-19 Removing the USB and CRT cable, blutooth card
4-36 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual