Filter
Top Products
4 Replacement Procedures 4.8 Top Cover
4.8 Top Cover
Removing the Top Cover
Remove the top cover according to the following procedures and Figures 4-16 and 4-17.
1. Turn the computer upside down and remove the following 11 screws:
- Eleven M2.5x8 black flat head screws
M2 5x5 black flat head screw.
M2 5x3 black flat head screw.
Figure 4-16 Removing the screws from the bottom of the computer
2. Turn the computer right side up.
3. Remove one M2.5x3 black flat head screw.
4. Disconnect the touch pad board flat cable from CN11 and Finger print flat cable
CN10.
5. Release the following 7 latches on the switch cover, in that order:
- Four Left latches
- Three right latches
6. Lift up the top cover.
4-32 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual