Filter
Top Products
4 Replacement Procedures 4.11 System Board, AC-IN cable and Fan
4.11 System Board, AC-IN cable and Fan
Removing the System Board, AC-IN cable and Fan
NOTE: Be careful of the eject button for the PC card. It can be damaged when
removing the board. Make sure it is securely installed.
Remove the System Board, MIC cable, AC-IN cable according to the following procedures
and Figure 4-20.
1. Release one M2x1 white flat head screw on the fan.
2. Disconnect fan cable from CN504 on the system board.
3. Remove the fan.
4. Remove one M2.5x1 black flat head screw on the system board.
5. Remove the system board.
System board
FAN
M2x1 white flat head screw
AC IN cable
-
M2 5x1 black flat head screw.
CN502
CN504
Figure 4-20 Removing the system board
6. Turn the system board upside down.
7. Remove the AC-IN cable from CN502.
4-38 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual